Pontiac 350 engine

The listing

Pontiac 350 ,All rebuilt, .060 over (364) .Ultrasonic cleaned to like new condition. 0 decked, Quench is set at .040. New Pistons and rings (file fit) rods resized. Crank turned 10/10 New Rod and Main bearings and two piece BOP rear main seal. New Cam bearings timing chain set Cam re-Ground with new lifters Cam specs are.215@.050 intake,223@.050 exhaust. 442 lift on intake, 465 on exhaust. intake lobe center dialed in at 107.5. With a compression ratio of 8.7-1. 19 7350 Heads casting -#11. Nice Valve job and guide Work and positive seals on all valves spring pressure 105 closed 260 open. Heads have been surfaced. Engine has been ran on the engine the stand camshaft all broken in. I marked the push rods and make sure they all turned and of course they did. Engine oil is drained oil filter cut open and analyzed. Everything looks fantastic. New oil put back in engine has been ran. Several times compression is 160. This will go up a little once the rings are seated. does not come with carburetor headers starter pulley’s or distributor and wires has new water pump fuel pump and plugs. if you’d like to hear it run, I can send you a video.